
Soluna Glow
Description:
Soluna Glow is a unique light activated additive that, when combined with a compatible clear coat, may be used to create a transparent surface finish that is invisible in daylight and provides long lasting glow effects in dark conditions. Soluna Glow is activated by natural or artificial light and will glow up to 8 hours after a short charge of less than 30 minutes.
Soluna Glow is long lasting; its glow gets brighter over time with continued use. It is as durable as the clear coat it is combined with. Soluna Glow is effective both indoors and outside on a wide variety of surfaces when added to appropriate clear coat bases. What do you want to Glow?
Directions:
Combining additive with water based clear coats:
1. Stir/shake additive vigorously to ensure full suspension of material.
2. Pour contents into 1 quart of approved clear coat.
3. Stir until well combined and apply immediately, stirring as necessary to retain equal distribution.
Tips for use:
1. Prepare surface to be coated according to the clear coat manufacturers directions.
2. For best results, apply a sealer coat of the clear base (without additive) over a light colored or white substrate and allow the surface to dry according to manufacturers directions. Combine the additive in 1 quart of the clear coat and apply coats (minimum of 2) until the desired effect is achieved. Finish with a final coat of clear oat without the additive for long term protection.
3. For darker surfaces or a stronger effect, additive can be mixed at a denser ratio.
4. The most even results are achieved by spraying the product, but itt may be applied in any method as recommended by the clear coat manufacturer.
Warranties:
Soluna Glow has been tested and is easily combined into many water based clear coat products. Because Soluna Glow is an additive, and not a surface sealer by itself, and Visible Spectrum LLC has no control over the actual combining or product that Soluna Glow wb is combined with by the consumer, Visible Spectrum LLC makes no warranties as to durability, brightness, or use warranties of any type.
Soluna Glow Brightens your World
What would you like to add a little glow to?

.jpg)






Approved Clear Coats for Water Based Soluna Glow
- ChemAqua - (Interior) - by Sherwin WIlliams
- 400 "Green" (Indoor/outdoor) Water based sealer - by SEMCO availible through MTLD at www.MTLivingDirect.com
- Extreme Satin "green" (Indoor/Outdoor) Waterbased two part epoxy - by SEMCO availible through MTLD at www.MTLivingDirect.com
- Crystal Gel, by Rosco Laboratories Inc.
- Clear Acrylic Glaze Gloss 5580, by Rosco Laboratories Inc.
- Clear Acrylic Glaze Flat 5581, by Rosco Laboratories Inc.
- COLORCOAT WB ACRYLIC - CLEAR Gloss 5620 by Rosco Laboratories Inc.
- COLORCOAT WB ACRYLIC - CLEAR Flat 5621 by Rosco Laboratories Inc.
- Masters Armor - Interior Wood Finish. by Old Masters
- Premium Plus WB Satin - Wood Coatings - Cloverdale Professional, - a product of Rodda Paint
Approved Clear Coats for Solvent Based Soluna Glow
- Xtra-Gloss - (indoor/outdoor) By SEMCO availible through MTLD at wwwMTLivingDirect.com
- 500 sealer - (indoor/outdoor) By SEMCO availible through MTLD at wwwMTLivingDirect.com
